Adhesive and Bonding Agents
Range of specially formulated chemicals to enhance the bonding between old and new concrete. It also includes full range of tile adhesives, both epoxy and cement based, for wall and floor applications. Bonding agents have been formulated to improve durability, compressive, tensile and flexural properties of modified mixes. Products from this range are highly versatile and can be used for variety of applications.
Corrobond AR
Corrobond AR is a styrene free, milky white emulsion, based on a pure acrylic polymer that is designed to improve the physical properties and integrity of cementitious mortars, screeds or renders, and act as a bonding agent / sealer to concrete, plaster or other porous substrates.
Know MoreView Corrobond AR TDS
Corrobond CTA
Corrobond CTA is a pre-mixed and bagged blend of cement, fine aggregates, fillers & special polymers to give a high bond strength tile adhesive for permanently fixing various types of ceramic tiles. Corrobond CTA is non metallic, free from chlorides and provides consistent adhesion characteristics. Complies to ANSI 118.1
Know MoreView Corrobond CTA TDS
Corrobond EBA
Corrobond EBA is a two component, solvent free, high strength, epoxy adhesive designed to provide superior bond over traditional methods, when bonding new to existing cementitious materials.
Know MoreView Corrobond EBA TDS
Corrobond ETA
Corrobond ETA is a 3 component, solvent free, thixotropic epoxy tile adhesive used for permanently fixing various types of tiles, marble or natural stone in areas subject to high abrasion, mechanical, chemical attack or permanent immersion.
Know MoreView Corrobond ETA TDS
Corrobond FTA
Corrobond FTA is a pre-mixed and bagged blend of cement, fine aggregates, fillers & special polymers to give a high bond strength, polymer modified, flexible and waterproof tile adhesive for permanently fixing various types of tiles. Corrobond FTA is non metallic, free from chlorides and provides consistent adhesion characteristics even in immersed conditions. Complies to ANSI A 118.4
Know MoreView Corrobond FTA TDS
Corrobond MEA
Corrobond MEA is a two component, solvent free, high strength, epoxy adhesive designed for repairing and bonding many commonly used building materials.
Know MoreView Corrobond MEA TDS
Corrobond PVA
Corrobond PVA is a milky white, latex polymer, based on polyvinyl acetate that is designed to improve the physical properties and integrity of cementitious mortars, screeds or renders, and act as a bonding agent / sealer to concrete, plaster or other porous substrates.
Know MoreView Corrobond PVA TDS
Corrobond SBR
Corrobond SBR is a milky white, latex polymer, based on styrene butadiene rubber that is designed to improve the physical properties and integrity of cementitious mortars, screeds or renders, and act as a bonding agent / sealer to concrete, plaster or other porous substrates.
Know MoreView Corrobond SBR TDS
Corrobond WTA
Corrobond WTA is an economical, thin or thick bed, polymer modified water resistant tile adhesive consisting of fine aggregates, fillers and special polymers to give high bond strength adhesive for ceramic tiles, mosaics and porcelain tiles. Complies to ANSI 118.4
Know MoreView Corrobond WTA TDS
Corrofix
Corrofix is a single component contact adhesive based on Poly-chloroprene rubber, designed for bonding many commonly used building materials particularly in hot & humid ambient conditions.
Know MoreView Corrofix TDS