Primers, Thinners and Cleaners
As an essential part of any successful system installation, primers are an important part of that system as they support subsequent coating performance. Available products include bituminous or epoxy based primers, as well as Zink rich solution. Also available thinners and solvents for tools and equipment cleaning and for cleaning of surfaces before Corrocoat protective coatings application.
Corroclean
Corroclean is a blend of solvents including methyl toluene, designed for general purpose degreasing & cleaning, particularly for equipment such as brushes, rollers and spray equipment to remove wet or uncured epoxy, polyurethane and acrylic resins.
Know MoreView Corroclean TDS
Corroclean AE
Corroclean AE is a single component, liquid applied blend of acids, inhibitors and powerful detergents, designed for etching and cleaning substrates, particularly concrete, steel and masonry, to provide a light mechanical key for bonding, prior to the use of resin coatings or paint.
Know MoreView Corroclean AE TDS
Corroprime 30S
Corroprime 30S is a low viscosity, solvent based, two component epoxy primer designed to penetrate into porous substrates such as concrete, screeds and masonry, to improve the bonding for other Corrotech epoxy repair, flooring & coating products, but can also act as a cost effective clear sealer coat in low trafficked areas.
Know MoreView Corroprime 30S TDS
Corroprime 626
Corroprime 626 is a low viscosity, solvent based, two component epoxy primer designed to penetrate into porous substrates such as concrete, screeds and masonry to improve the bonding for Corrotech polysulphide & polyurethane sealants.
Know MoreView Corroprime 626 TDS
Corroprime AC
Corroprime AC is a single component, silane modified acrylic based system used as primer to concrete and masonry works prior to application of Corrocoat AC.
Know MoreView Corroprime AC TDS
Corroprime EMT
Corroprime EMT is two component, high build moisture tolerant epoxy primer designed to penetrate into porous substrates such as concrete, screeds and masonry, to improve the bonding for other Corrotech epoxy repair, flooring & coating products.
Know MoreView Corroprime EMT TDS
Corroprime EP SF
Corroprime EP SF is a solvent free, two component, high build epoxy primer designed to penetrate into porous substrates such as concrete, screeds and masonry, to improve the bonding for other Corrotech epoxy repair, flooring & coating products, but can also act as a cost effective, solvent free, clear sealer coat in low trafficked areas.
Know MoreView Corroprime EP SF TDS
Corroprime SB
Corroprime SB is a single component, premium quality, fast drying, solvent based, bituminous primer that penetrates into porous substrates such as concrete and masonry, to improve the bonding for other Corrotech waterproofing products, or act as a basic membrane for the protection of low risk structures below ground against damp and water vapour.
Know MoreView Corroprime SB TDS
Corroprime ZR1
Corroprime ZR1 is a one component anti-corrosion primer for steel & other ferrous metals, consisting of a blend of synthetic resins, solvents & high content of zinc fillers that is designed to corrode sacrificially by the galvanic mechanism therefore providing an active protection layer that extends the life of the base metal.
Know MoreView Corroprime ZR1 TDS