Protective Coatings
CCC has a range of concrete protective coatings for protection of concrete structures, masonry, natural stone, marble…Full range of coatings offered, from aesthetic solutions, to heavy duty chemicals protection and anti-graffiti coating. In the range included Polyurea based coatings used for fast-curing and high performance applications like immersed conditions.
Corrocoat AC
Corrocoat AC is a single component, high performance, elastomeric, protective and decorative coating based on special acrylic polymers with a penetrating acrylic modified silane primer, designed to protect exposed reinforced concrete structures from chloride ions, carbon dioxide, acid gases, water, salts and extreme weathering.
Know MoreView Corrocoat AC TDS
Corrocoat CR
Corrocoat CR is a 100% solid, solvent free, two component, high build epoxy coating, specifically formulated to provide excellent abrasion and chemical resistance to steel or concrete substrates, including areas subject to permanent immersion.
Know MoreView Corrocoat CR TDS
Corrocoat EPS
Corrocoat EPS is a two component high build epoxy based, solvent free coating modified with polysulphide resin. This flexible and toughened epoxy is specifically designed to protect concrete and steel. Product is highly durable water resistant and with good chemical resistance to wide range of chemicals including oils, sludge, mild acids and solvents.
Know MoreView Corrocoat EPS TDS
Corrocoat ET
Corrocoat ET is a two component, solvent free, tar extended, high build epoxy coating, specifically formulated to provide excellent abrasion and chemical resistance to steel or concrete, on horizontal or vertical surfaces including areas subject to permanent immersion.
Know MoreView Corrocoat ET TDS
Corrocoat HB
Corrocoat HB is a 100% solid, solvent free, two component, high build epoxy coating, specifically formulated to provide excellent abrasion and chemical resistance to steel or concrete, particularly on vertical surfaces including areas subject to permanent immersion. It is normally applied to a nominal dry film thickness of 400 – 500 microns in 2 coats, and can also be used in conjunction with glass fibre reinforcement to increase protection over joints and cracks.
Know MoreView Corrocoat HB TDS
Corrocoat HBF
Corrocoat HBF is a solvent free, two component, high build non sagging epoxy coating designed to provide a durable finish with excellent abrasion and chemical resistance. It is available in a wide range of colours to provide good aesthetics with an easy clean surface.
Know MoreView Corrocoat HBF TDS
Corrocoat OWR
Corrocoat OWR is an aqueous formulation based on silanes. Treated surface produces hydrophobic and oleophobic properties and protect surfaces from staining, such surfaces are then easy to clean. Unlike conventional protection systems, surfaces treated with Corrocoat OWR regenerate to original appearance once dried, without formation of glossy films.
Know MoreView Corrocoat OWR TDS
Corrocoat PUA HF
Corrocoat PUA HF is a 2-component polyurea resin, which cures very fast into an elastic membrane with crack-bridging capacity. This product can easily be applied by 2-component spraying equipment. Corrocoat PUA HF can be combined with different geotextiles to obtain on-site applied, seamless liners.
Know MoreView Corrocoat PUA HF TDS
Corrocoat PUA IG
Corrocoat PUA IG is a 2 – component polyurea resin, which cures very fast into an elastic membrane with crack-bridging capability. It is an extra fast-curing system that can easily be applied by 2 – component spraying equipment. Corrocoat PUA IG can be combined with different geotextiles to obtain on site applied, seamless liners.
Know MoreView Corrocoat PUA IG TDS
Corrocoat PUA SG
Corrocoat PUA SG is a 2 – component high performance grade polyurea system, which cures very fast into an elastic membrane with crack-bridging capability. It is an extra fast-curing system that can easily be applied by hot spraying equipment. Corrocoat PUA SG can be combined with different geotextiles to obtain on site applied, seamless liners.
Know MoreView Corrocoat PUA SG TDS
Corrocoat UVR
Corrocoat UVR is a solvent based, two-component, polyurethane coating designed for the protection of masonry or concrete walls against abrasion, chemicals and aggressive environments.
Know MoreView Corrocoat UVR TDS
Corrocoat WR
Corrocoat WR is an economical, clear, single component, very low viscosity silane siloxane based sealer, designed to penetrate deep into the pores of concrete, masonry, natural stone and marble, forming an invisible barrier that protects the substrate against the ingress of water, chloride ions, salts and other weathering effects.
Know MoreView Corrocoat WR TDS